#Ip stb 1 password#
#Ip stb 1 Bluetooth#

IP address, Mask, Gateway are assigned automatically by DHCP DNS, login, and password are specified manually by the user. If this mode is enabled, Ethernet network interface settings (IP address, Mask, Gateway, DNS) are assigned automatically login and password are specified manually by the user. The option must be enabled if the PPPoE connection is used. The IP address is not assigned to the local interface (ability to receive automatic settings by DHCP is forbidden, and previously configured network interface settings (if they were specified) are lost. The automatic configuration of the Ethernet network interface is obtained by DHCP, excepting the DNS server IP address (one or more) that is specified manually by the user.ДЄll settings of the network interface (IP address, Mask, Gateway, DNS) are specified manually. In particular, it is used for automatic network settings receiving from the ISP (provider). If this mode is enabled, the automatic configuration of the Ethernet network interfaceВ is assigned from a server by DHCP protocol. *В -В the corresponding value of environment variable is shown in brackets Key or passphrase (wifi_psk)* - password to accessing w ireless LAN.Encryption (wifi_enc)* - w ireless encryption standards ( WEP, AES, etc.).Authentication mode (wifi_auth)* - w ireless security / authentication standards ( WPA, WPA2, etc.).SSID (wifi_ssid)* - w ireless LAN identifier ( Service Set identifier).In addition, wireless Wi-Fi interface uses the next parameters: DNS (dnsip)* - IP address of DNS (Domain Name System) server.Gateway (gatewayip)* - IP address of Default gateway.Mask (netmask)* - subnet mask assigned to network interface.IP address (ipaddr_conf)* - IP address assigned to network interface.The next network parameters might be assigned (obtained automatically from DHCP-server or specified manually) to every network interface of STB (wired Ethernet or wireless Wi-Fi):

#Ip stb 1 Bluetooth#

See description in Connecting Bluetooth devices. Bluetooth - wireless Bluetooth connection to auxiliary devices like sound receivers and input devices.Built-in Wi-Fi-module or external Wi-Fi adapter (via USB) is used f or STB connection to Wi-Fi access point. Wireless (Wi-Fi) - connection over Wi-Fi radio link.The type of physical layer standards is identical to Wired (Ethernet). PPPoE - connection using PPPoE network protocol (Point-to-Point Protocol over Ethernet).N etwork type - Ethernet, physical layer standards - 10BASE-T, 100BASE-T(x). Used shielded or unshielded Cat5, Cat5e ,В Cat6 or Cat6A cables using 8P8C (RJ-45) modular connectors with straight-through or cross-over wiring. Wired (Ethernet) - connection via Ethernet port STB.The following network connection options may be displayed: The Network section contains STB network connections settings. This section of System settings contains STB network connections. * Services or SET buttons can be used in old RC models. In Select a portal for loadingwindow в‡’ System settings (this option can be useful to change settings immediately before portal loading in STB).In Embedded portal: Main menu в‡’ Settings в‡’ System settings.System Settings menu consists of main STB settings.